Features

Get a quote on a Wikus bandsaw blade

Check out our coolant proof digital calipers

Get a quote on Special taps and endmills

Geometric® Chasers on clearance

Get in touch with us
Phone: 203-753-5121

Fax: 203-755-9011

Toll-free: 800-992-3233

Email us:
sales@danco-inc.com

Hours: 8am - 5pm EST
Mon-Fri


Jet Lathes (Gear Headed)

Features

  • Uniquely designed exclusively by JET
  • Tolerance test certificate included
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
  • Chrome molybdenum headstock gears are hardened, ground, and shaved
  • Universal gearbox allows inch, metric, diametrical, and module pitch threads. No change gears required
  • Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
  • T-slotted compound slide featuring a 4-way tool post
  • One-piece cast iron base absorbs vibration allowing heavier cuts
  • High quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground
  • Removable gap allows up to 23-5/8" diameter work on 16", 27-1/2" on 18"
  • Five position automatic carriage stop increases productivity
  • Attractive chrome control levers, dials, and knobs complete this impressive package

Check The Specifications Below

16" and 18" ZX Series Lathes

(Shown GH-1640ZX)

Stock Number: 321930 321940 321950 321960 321970
Model: GH-1640ZX GH-1660ZX GH-1840ZX GH-1860ZX GH-1880ZX
Swing Over Bed (in) 16 16 18 18 18
Swing Over Cross Slide (in): 10 10 10 7/8 10 7/8 10 7/8
Swing Through Gap (in): 25-7/8 25-7/8 27-1/2 27-1/2 27-1/2
Length of Gap (in): 12-1/4 12-1/4 12-1/4 12-1/4 12-1/4
Distance Between Centers (in): 40 60 40 60 80
Hole Through Spindle (in): 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8
Spindle Mount: D1-8 D1-8 D1-8 D1-8 D1-8
Spindle Taper (With sleeve): MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5)
Number of Spindle Speeds: 12 12 12 12 12
Range of Spindle Speeds (RPM): 25 - 1,800 25 - 1,800 25 - 1,800 25 - 1,800 25 - 1,800
Number of Longitudinal & Cross Feeds: 122 122 122 122 122
Range of Longitudinal Feeds (in/rev): 0.0015 - 0.0913 0.0015 - 0.0913 0.0015 - 0.0913 0.0015 - 0.0913 0.0015 - 0.0913
Range of Cross Feeds (in/rev): 0.0006 - 0.0365 0.0006 - 0.0365 0.0006 - 0.0365 0.0006 - 0.0365 0.0006 - 0.0365
Number of Inch Threads: 61 61 61 61 61
Range of Inch Threads: 1-5/8 - 72 1-5/8 - 72 1-5/8 - 72 1-5/8 - 72 1-5/8 - 72
Number of Metric Threads: 24 24 24 24 24
Range of Metric Threads (mm): 0.05 - 20 0.05 - 20 0.05 - 20 0.05 - 20 0.05 - 20
Max Tool Size (in): 1 x 1 1 x 1 1 x 1 1 x 1 1 x 1
Max Compound Slide Travel (in): 5-1/8 5-1/8 5-1/8 5-1/8 5-1/8
Max Cross Slide Travel (in): 9 9 9 9 9
Max Carriage Travel (in): 35 55 35 55 75
Tailstock Spindle Travel (in): 5 5 5 5 5
Taper in Tailstock Spindle: MT-4 MT-4 MT-5 MT-5 MT-5
Follow Rest Capacity (in): 1/2 - 3-1/2 1/2 - 3-1/2 1/2 - 3-1/2 1/2 - 3-1/2 1/2 - 3-1/2
Steady Rest Capacity (in): 3/8 - 7 3/8 - 7 3/8 - 7-1/2 3/8 - 7-1/2 3/8 - 7-1/2
Width of Bed (in): 1- 3/8 13-3/8 13-3/8 13-3/8 13-3/8
Overall Dimensions (LxWxH/in): 97-1/2 x 40 x 48 116-1/2 x 40 x 48 97-1/2 x 40 x 48-7/8 116-1/2 x 40 x 48 7/8 136-1/8 x 40 x 48 7/8
Main Motor: 7-1/2 HP, 3 Ph 230/460V Prewired 230V 7-1/2 HP, 3 Ph 230/460V Prewired 230V 7-1/2 HP, 3 Ph 230/460V Prewired 230V 7-1/2 HP, 3 Ph 230/460V Prewired 230V 7-1/2 HP, 3 Ph 230/460V Prewired 230V
Net Weight (lbs) 5475 5795 5980 6245 6590

Standard Equipment

  • 10" 3-jaw chuck with top reversing jaws
  • 12" 4-jaw chuck
  • 12" face plate (16" models)
  • 16" face plate (18" models)
  • 4-way tool post
  • Follow rest
  • Large capacity steady rest
  • Fully integrated coolant system
  • Full length splash guard and coolant return
  • Large easy to use foot brake
  • Articulating halogen work lamp
  • Centrally located controls with jog button
  • Threading dial
  • Mounting pads and levelers
  • Spindle sleeve (MT-7 to MT-5)
  • Dead center
  • Live center
  • Tool box and adjusting tool

Optional Accessories

  • 5C lever-type collet closer (321282)
  • 16 pc. 5 C collet set (650014)
  • Taper attachment kit (321281) (installation available)
  • MT-4 live center (465304)
  • MT-5 live center (465305)
  • MT-4 bull nose live center (465330 & 465332)
  • Rotary phase convertor (577300K)
  • Digital readouts installed

NOTE: Rotary phase converter must be 10 HP or higher with high torque kit. Use of static phase converter will void warranty

For Pricing and Availability Please contact one of our sales people by phone at: 1-800-992-3233

Or Email us at: sales@danco-inc.com

To view our main Jet Machinery page CLICK HERE

CLICK HERE to check out and example of a Jet Belt driven Lathe

HOME | SPECIALS | BROWSE BY MANUFACTURER | MATERIAL HANDLING | TECHNICAL HELP

SPECIAL TOOLS | CONTACT | PRODUCT REQUEST | SIGN UP FOR DANCO'S NEWSLETTER